|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Touch Aurora Powder 02 Pearl Nail Powder
Touch Aurora Powder Pearl Powder is a premium collection of ultra-finely ground pigments designed to add a captivating shine to your manicure. Thanks to the impeccable quality of the raw materials, the powder spreads in an incredibly light, dense, and even layer without bald spots, mirror-like scratches, or unevenness.
Features
- Ultra-fine milling guarantees flawless, mirror-like smoothness and pigment density with minimal consumption.
- The pigment retains its original luster, does not rub off at the edges, and does not fade during long-term wear.
- Maintains a luxurious and pure pearlescent shine under any type of lighting (daylight, evening, or artificial).
Directions for use
Option 1 (Classic application over a hot top coat):
- Apply the top coat without the sticky layer and cure it under the lamp for exactly 20 seconds.
- While the top coat is still hot, use your finger or an applicator to apply/draw in Touch Aurora Powder.
- Carefully brush off any remaining powder with a soft, fluffy brush.
- Lightly file the edge of the nail, removing excess pigment from the free edge.
- Apply a minimal amount of Ultrabond (primer) to the semi-dry edge of the nail.
- Cover the entire nail with a thin, fixing layer of elastic base coat, cure in the lamp for 60 seconds, and then seal with the finishing top coat.
Option 2 (Application with NailFresher):
- Apply the top coat without the sticky layer and cure in the lamp for 30 seconds.
- Wipe the nail surface with a lint-free cloth Use a cloth soaked in NailFresher degreaser.
- While the surface is still slightly damp from the cleaner evaporation, apply the powder to your finger and spread it over the nail until it achieves a mirror shine.
- Remove excess powder with a soft brush, file the edge with Ultrabond, fix it with a thin base coat (allow it to dry), and apply a final top coat.