|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Nisima H_715fK 2.3mm Needle Carbide End Mill, Red
Nisima H_715fK Needle Carbide End Mill (Sharp Cone) 2.3 mm with red markings (fine abrasive) is designed for precision work in narrow and delicate areas: it helps carefully remove a thin layer of material, trim excess from the side ridges, file down the back of the nail after extensions, and smooth the transition between the coating and the natural nail with a controlled cut.
Product Features
- Needle shape: a sharp cone for working in hard-to-reach and narrow areas.
- 2.3 mm diameter: convenient for pinpoint correction and delicate filing.
- Red markings: fine abrasive for thin, precise material removal.
- Cross-shaped Serration: provides controlled processing and helps reduce the risk of overheating with proper technique.
- Carbide material: suitable for gel and acrylic correction, fine removal, and architectural finishing.
- For side ridges: conveniently removes excess material and makes the nail visually thinner and neater.
- Suitable for thinning nails: can be used when working with thickened/keratotic nails (as indicated by the nail technician).
- Compatible with standard devices: fits most milling cutters with a standard mount.
Directions for use:
- Install the milling cutter in the device and check that it is securely fixed.
- Select the speed and Adjust the rotation direction to your technique and material type, and work without applying excessive pressure.
- Carefully trim the side ridges, removing excess material and smoothing the shape.
- If necessary, file the underside of the nail after extensions and smooth the transition between the coating and the natural nail.
- Use a cutter to gently remove a thin layer of material, controlling the heat and cutting depth.
- After the procedure, clean the nozzle, disinfect and sterilize according to the protocol, then store in a closed container.
Diameter: 2.3 mm