|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gypsum Black Gel by Touch
Gypsum Black is a decorative gel with a textured, "plaster" finish for 3D effects, imitation stucco, and volumetric nail designs. Its dense, non-uniform consistency doesn't run, holds its shape perfectly, and spreads evenly without ridges. After curing, it leaves no sticky layer and requires no top coat, preserving its original texture and resistance to damage.
Features of Gypsum Black Gel by Touch
- Relief texture with small granules: creates expressive volume and a tactile "plaster" effect.
- Thick, static consistency: allows for easy modeling of elements without drips or slippage.
- Clean application: even application without bumps or creases.
- Non-sticky finish: does not require top coat; can be applied over a color coat and top coat.
- Wearability: the texture does not rub off and is resistant to everyday wear. impacts.
- Convenient tools: works with a synthetic brush or orange stick.
- For designs: 3D elements, bas-relief, textured lines, and accent details.
How to use Gypsum Black gel by Touch
- Preparation (for both methods): Perform standard nail plate preparation. Apply a thin, rubbing layer of base, then smooth/strengthen (Smart Rubber). Apply color.
- Application over No Wipe Top Coat:
- Apply the color with a non-sticky top coat and cure for 10 seconds (LED 48W).
- Hot Apply the Gypsum Black design to the top coat using a brush/stick.
- Cure for at least 120-180 seconds (LED 48W).
- Application over a tacky top coat:
- Overlay the color with a tacky top coat and cure for 30 seconds (LED 48W).
- Hot Apply the Gypsum Black design to the top coat.
- Cure for at least 120-180 seconds (LED 48W), then remove the dispersion from the top coat.
Purpose: 3D and textured nail designs, 3D elements, bas-relief, imitation plaster.
Composition: Acrylates Copolymer, Polyurethane-11, Butyl Acetate, Methyl Methacrylate-Methacrylic Acid Copolymer.