|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Luna Moon Shimmer Gel #1
Luna Moon Shimmer Gel is a classic light-curing polymer material with the addition of elegant glitter, designed for durable shaping and significant nail extension. Thanks to the presence of special photoinitiators, the composition quickly polymerizes under the influence of ultraviolet light of a specific wavelength. The gel has a comfortable medium-thick consistency and optimal medium pigmentation that perfectly covers the free edge, guaranteeing an aesthetically pleasing and durable result.
Features
- The acid-free and safe TPO FREE formula is gentle on natural nails.
- High shock-absorbing properties prevent cracks from accidental impacts during wear.
- Ideal for the file-free modeling technique, as well as for extensions on upper nail forms.
- Comfortable polymerization without the unpleasant burning sensation in the lamp.
- The thixotropic properties allow the material to become more fluid with brush strokes, and the product can also be additionally heated to reduce its thickness.
- Depending on air temperature, the gel becomes thicker in cold weather and more fluid. Keep warm.
- High material hardness is achieved with a coating thickness of 1 mm, while it does not shrink and holds the arch perfectly.
How to use
- Perform a hygienic manicure, lift the scales of the nail plate with a 220-grit file or a 100-grit buff, and thoroughly clean the nail of dust.
- Double-degrease the nail surface and nail beds with Nail Prep LUNAmoon, using lint-free wipes and an orange stick.
- Apply primer (for classic nail extensions) or skip this step if the base is sufficiently acidic.
- Using a flat brush, apply a base of Rubber Base LUNAmoon, drawing all the beds, and cure in a lamp. 60 seconds, then wipe off the stickiness.
- For strengthening: apply gel, leaving a 0.5-1 mm gap from the cuticle, cure for 60 seconds, file the form, file 1 mm of the natural nail from the inside (if the nail is thin), and wipe off the sticky layer.
- For extensions: install the form, lay a base coat of clear gel on the artificial nail, cure for 30 seconds, file the free edge, remove dust, re-apply base coat over the filed areas, and cure for 30 seconds.
- Perform basic alignment of the architecture with gel, clamp the arch after 20 seconds of polymerization (for gels with glitter), and cure in the lamp for a full 120 seconds.
- Remove the sticky layer, apply a color coat (if necessary), and seal the result with a top coat, drying it. 120 seconds.
- Do not wipe the finished top coat with alcohol-containing liquids after drying, to maintain its flawless gloss.