|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gel for extension and strengthening Premium Gel №2 from Luna Moon
Premium Gel №2 from Luna Moon is a classic polymer gel for extension, combining the strength of acrylic and the elasticity of gel. Contains photoinitiators that provide reliable curing under UV/LED lamp and allow to significantly lengthen the nail plate, creating a strong architecture without shrinkage.
Features of the gel for extension and strengthening Premium Gel №2 from Luna Moon
- Acid-free formula, safe for natural nails
- Cushioning does not crack when struck
- Medium consistency and thixotropy; does not flow and is self-leveling
- Medium pigmentation, covers the free edge
- Suitable for the “no filing” technique and work on upper forms
- Does not cause burning during polymerization
- Changes viscosity depending on temperature: thickens in the cold, liquefies in the heat
- Hard at a thickness of ≥1 mm, holds the arch well without shrinkage
- Requires a backing made of Rubber Base LUNAmoon
- Polymerization at a wavelength of 365-405 nm, power 36-48 W — 120 seconds
How to use for strengthening Premium Gel №2 from Luna Moon
- Remove the old coating and, if necessary, leave 2 mm of length for alignment.
- Finish the shape with a 220 grit file or a 100 grit buff, lifting the scales of the nail plate.
- Do a manicure and, when working with a remover, wash your hands with soap.
- Degrease the nail with Nail Prep LUNAmoon in two steps (4 napkins).
- If desired, apply a primer.
- Apply a thin layer of Rubber Base LUNAmoon, rubbing movements, and dry for 60 s.
- Erase the stickiness and level the Premium Gel, retreating 0.5-1 mm from the cuticle; dry for 60 sec.
- File the shape to create a thickness of 0.5 mm on the free edge.
- For thin nails, file 1 mm of the plate from the inside to avoid curling.
- Erase the sticky layer and apply gel polish if desired; dry for 60 sec.
- Apply top coat and dry for 120 sec without wiping.
How to use for extension Premium Gel №2 by Luna Moon
- Shorten the length of the nail to 1 mm, give it a round shape.
- File with a 220 grit file or a 100 grit buff.
- Do a manicure and wash your hands when working with the remover.
- Degrease the nail with Nail Prep LUNAmoon (2 approaches).
- Apply LUNAmoon primer.
- Apply a thin layer of Rubber Base LUNAmoon, dry for 60 sec.
- Set the top form to the desired length and architecture.
- Put Premium Gel into the form, press it to the nail; dry for 30 sec.
- Remove the form, file the free edge and shape it.
- Erase the sticky layer and, if necessary, apply Rubber Base to the filed areas, dry for 30 sec.
- Align with Premium Gel, clamp in the lamp for 10-15 sec, then dry for 120 sec.
- Erase the stickiness before applying the top coat; apply top coat and dry for 120 sec without wiping.
Shelf life unopened: 24 months
Shelf life after opening: 18 months
Polymerization at a wavelength 365-405 nm, power 36-48 W - 120 seconds
Volume: 15 ml