|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Builder Gel in shade №12 by YouAreCute
Builder Gel №12 by YouAreCute is a professional light-curing gel for modeling and strengthening nails. Medium consistency and pigmentation allow you to easily form an arch and align the nail plate, providing a beautiful and long-lasting coating. The acid-free formula eliminates burning during polymerization, and the shock-absorbing properties make the material resistant to impacts and mechanical damage.
Advantages of Builder Gel №12
- A durable and elastic gel for nail extension and strengthening.
- Medium consistency and pigmentation — easy alignment and covering of the free edge.
- Acid-free formula, does not cause burning in the lamp.
- Shock absorption - the material does not crack or break.
- Suitable for the "upper forms" technique and without filing the natural nail.
- Thixotropic - becomes less frequent when moving the brush; can be heated for ease of use.
- Full polymerization in 120 seconds with a UV/LED lamp 36-48 W.
- Permissible coating thickness - up to 0.5 mm at the edge and 1 mm at the apex.
How to use Builder Gel #12 for extensions
- Removing the old coating and preparing the nail (leaving 2 mm of the form, which we will remove after leveling).
- Filing with a 220 grit file or a 100 grit buff without strong pressure.
- Manicure; when working with removers, wash your hands thoroughly with soap.
- Degreasing the nail with Nail Prep in two steps using 4 napkins (one for 5 fingers).
- If necessary — primer, if the Rubber Base substrate is acidic enough, you can skip it.
- Apply Rubber Base with a flat brush, draw all the sinuses of the nail, dry for 60 seconds.
- Erase the stickiness, level the Builder Gel with an indent of 0.5-1 mm from the cuticle, dry for 60 seconds.
- File the shape after leveling to form the thickness of the free edge.
- For thin nails — file 1 mm of the natural nail from the inside to avoid curling and peeling.
- Apply top coat, dry for 120 seconds, do not wipe after polymerization to preserve shine.
- For classic extension: install the form, lay out transparent gel, dry for 30 seconds, file the free edge, apply Rubber Base to problem areas, level with gel and final polymerization for 120 seconds.
Volume: 15 ml