|
Quantity
|
Out of stock
|
||
|
|
|||
Eyebrow compass
It is intended for modeling eyebrows in accordance with the individual proportions of the face. The compass of Leonardo is used to build eyebrows according to the golden ratio. The golden section technique is based on using the eyebrows as a starting point to create a proportional and symmetrical face.
How to use:
First, you need to determine the center point. To do this, between the eyebrows, slightly above the bridge of the nose, it is necessary to determine the center of the face and mark this point. Next is the starting point of the eyebrow. To find it, the ends of the compass, which determine long distances, are placed on the lacrimal canals. The resulting small distance shows the distance between the eyebrows. The third point is the end of the eyebrow. To determine it, the compass is applied like a ruler - from the point of the edge of the nose (in the place where it touches the cheek) through the point of the outer edge of the eye to the end of the eyebrow. The fourth is the highest point. To build the extreme legs of the compass are placed at the end and the beginning of the eyebrow. In this case, the middle leg of the compass should be directed towards the temple. The location of the middle leg will be the highest point. After applying these points, the width of the eyebrows is determined and the upper and lower lines are adjusted. To do this, all the marked points are connected. In addition, using a compass, check a symmetry is performed - the distances of each eyebrow from the highest point to its beginning and end must match. It is also important to check whether the central point is correctly marked (the distance from this point to the beginning of the eyebrow should be the same on both sides).