Quantity
|
Out of stock
|
||
|
Multifunctional device for laminating eyelashes Amica Lashes
The multifunctional device is designed for placing eyelashes on a roller (form) during the lamination procedure.
The tool is made in a factory where medical instruments are made. The product has a round mirror with magnification (checking the quality of the calculation) - removable. Instead, disposable attachments are attached to the device: microbrushes and combs. It has an all-welded connection with the handle, which allows no glue to accumulate in the connecting part. The angle of inclination of the needle is 145 degrees along the obtuse angle, the length of the needle after the bend (angle) is 6 mm. These dimensions are recommended for manufacturing, but may vary. Both sides of the MFP handle are knurled so that the tool does not slip in the hands of the master, even with gloves.
Sterilization and disinfection: The device is resistant to disinfection with a triple solution of 2% technical formalin, 0.3% technical synthetic phenol, 1.5% sodium bicarbonate at a temperature of 18℃ for (45+5) minutes, the handle is resistant to air disinfection at a temperature (120±4)℃ for (45+5) min.